In recent years, the breeding mode of farmers has become better and better, and the breeding mode has gradually changed from the traditional flat breeding method to a new mode of modern chicken breeding equipment. Cage breeding is the use of advanced science and technology and industrial chicken breeding equipment in the chicken industry to improve breeding management and make full use of equipment and
feed to increase the production efficiency of chickens.
The most important thing in the whole set of chicken raising equipment is the chicken coop. Now we will introduce several commonly used chicken coops:
The fully stepped chicken coop has 2 to 3 layers. Its advantages are: ①The cages of each layer have large open areas, good ventilation and uniform illumination; ②The manure removal operation is relatively simple; ③The structure is simple and easy to maintain; ④When the machine fails or power failure Convenient for manual operation. The disadvantage is: low stocking density.
In order to further increase the stocking density, on the basis of the full-step cage, the upper and lower layers are partially overlapped to form a half-step chicken cage. Its feeding density is higher than that of the full ladder, which can generally be increased by about 30%, but it is lower than that of the stacked type. Compared with the full ladder chicken cage, due to the obstruction of the manure baffle, the ventilation effect is poor, but the operation is more convenient and it is easy to observe the status of the chickens.
(3) Laminated broiler cage
The upper and lower layers of the half-step broiler cage are completely overlapped to form a stacked chicken cage, and there is a conveyor belt between the layers to remove the chicken manure. Its advantages are: high house feeding density, greatly reduced chicken farm floor area, and improved production efficiency of breeders; but higher requirements for chicken house construction, ventilation equipment and manure removal equipment.
(4) Breeder cage
There are single-layer chicken cages and artificial insemination breeder cages. Different from ordinary chicken cages, in order to ensure the normal mating of male and female chickens or artificial insemination, attention should be paid to: ①The size of single cage and the diameter of cage mesh wire should be adapted to the characteristics of larger breeder weight; ②Generally each There are only 2 hens in a single cage; ③The cage door structure should be convenient for catching chickens for artificial insemination
chickens, increase housing density and facilitate management, rearing chicken cages are commonly used. Generally, chicken cages are 3~4 layers and 6~8 single cages.
In order to improve the survival rate and uniformity of reared
(6) Brooding brooding into a one-stage chicken coop
This cage is commonly used in areas where layer chickens are raised with two-stage systems. The characteristic of the chicken cage is that the chickens can be raised from the age of 1 day to before laying (about 100 days of age), which reduces the stress and labor intensity of the chickens transferred to the group. The chicken coop has three layers, and only the middle layer is used in the chick stage. As the chickens grow up, they will gradually spread to the upper and lower layers. Xinsheng Breeding Equipment Factory has advanced production equipment and a group of solid and hard-working technicians. On the basis of traditional craftsmanship, combined with modern breeding technology, they dare to reform and innovate continuously to fully meet the actual needs of the majority of farmers. Chicken farmers provide turnkey projects and provide various chicken cages.
Post time: Dec-06-2021